Flex Sensor 2.2″

A simple flex sensor 2.2″ in length. As the sensor is flexed, the resistance across the sensor increases.

The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).




Flex Sensor 4.5″

A simple flex sensor 4.5″ in length. As the sensor is flexed, the resistance across the sensor increases.

The resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend).




Force Sensitive Resistor

This force sensitive resistor will vary its resistance depending on how much pressure is being applied to the sensing area

This FSR can sense applied force anywhere in the range of 100g-10kg.

مستشعر الضغط تختلف مقاومته تبعا لمدى الضغط ويجري تطبيقه على منطقة الاستشعار




Piezo Element Murata 7BB

:Features

Product Category: Piezo Alarms
Speakers Type: Piezoelectric
Frequency: 2.8 kHz
Impedance: 200 Ohms
Shape: Round
Diameter: 35 mm
Magnet Material: Brass
Brand: Murata Electronics

 




Touch Sensor

Product Name : Touch Switch Module (TTP223)
Type : Digital touch sensor
Model : TTP223
Working voltage: 2.0 V to 5.5 V

 




مستشعر الضغط الجوي

يمكنك هذا المستشعر من تحسس التغير فى الضغط الجوى بكل سهولة كما يمكن ربطة بمختلف المتحكمات الدقيقة مثل الاردوينو وغيره

الموصفات:

  • الموديل : GY-BMP280-3.3
  • نطاق الضغط: 300 ~ 1100hpa (يساوي +9000… -500 متر فوق مستوى سطح البحر)
  • جهد التشغيل (v): 1.71 فولت إلى 3.6 فولت
  • الدقة المطلق (T = 0 … + 40 ° C): ~ ± 1 hPa
  • نطاق درجة الحرارة: -40 الى  + 85 درجة مئوية



مستشعر ضغط السائل

يتم تركيبه بشكل عمودى على الانبوب الناقل للسائل المراد قياس ضغطه

المواصفات:

  • جهد التشغيل : 5 فولت تيار ثابت
  • الجهد الناتج : 0.5 – 4.5 فولت تيار ثابت
  • تيار التشغيل: ≤10 مللي أمبير
  • نطاق ضغط العمل: 0-1.2 ميجا باسكال
  • أكبر ضغط يمكن تحمله: 2.4 ميجا باسكال
  • الضغط التدميرى للمستشعر: 3.0 ميجا باسكال
  • العمل TEMP. نطاق 0-85 ℃
  • نطاق درجة حرارة التخزين 0-100 درجة مئوية
  • قياس الخطأ ± 1.5٪ FSO
  • خطأ في نطاق درجة الحرارة: ± 3.5٪ FSO
  • زمن الاستجابة ≤2.0 مللي ثانية



وحدة استشعار الاهتزازات (بيزو سيراميك)

وحدة استشعار الاهتزازات (بيزو سيراميك)

This vibration sensor is based on piezoelectric ceramic chip analog vibration. It makes use of the anti-conversion process that piezoelectric ceramic vibration will generate the electric signals.
When vibrating the piezoelectric ceramic chip, the sensor’s signal terminal will generate electrical signals.
The sensor can be used with Arduino dedicated sensor shield, and Arduino analog port can perceive weak vibration signals, so that it can make interactive works related to vibration, such as electronic drum.
Connect the vibration sensor to the analog port A0 of Arduino UNO. When vibrating the sensor in different degrees, you will see the different output value displayed on serial monitor.

Features:

  • Operating voltage: 3.3V or 5V
  • Operating current: <1mA
  • Operating temperature range: -10℃~+70℃
  • Interface type: analog signal output
  • Pin definition: S signal output, + power (VCC), -ground (GND)
  • Input: the positive electrode of the piezoelectric ceramic sheet
  • GND: the negative electrode of the piezoelectric ceramic sheet



وحدة استشعار الضغط الرقمي

تعتمد وحدة مستشعر الضغط على شريحة عالية الدقة حيث يصل قياس المستشعر الى  40 كيلو باسكال ، ويمكنك توصيل خرطوم 2.5 مم على فوهة المستشعر، كما تمتاز بصغر الحجم

المواصفات:

  • الرقاقة: HX710B
  • جهد التشغيل: 3.3-5 فولت
  • مدى قياس الضغط: 0-40 كيلو باسكال
  • مقاومة المستشعر: 5 كيلو أوم
  • الأبعاد: 18 × 13 مم (ثقب تثبيت 2 مم)