40 رأس دبوس
40 رأس دبوس
المواصفات
- المسافة بين الدبابيس : 2.54 ملم
- عدد الدبابيس : 40 دبوس
- ارتفاع الدبابيس : 19 ملم
- عدد القطع عند الشحن : 10 قطع
40 رأس دبوس
المواصفات
المواصفات :
Cables for raspberry Camera 100cm
Cables for raspberry Camera 50cm
The Raspberry Pi 4 Case Fan is an official accessory for Raspberry Pi 4, for use with the official Raspberry Pi 4 Case. Designed for over-clockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.
Ethernet LAN Network Module
Features:
This is the assembled version of the Pi T-Cobbler Plus
Does not waste any space on the bread board enabling the use of most of the bread board
Ergonomically convenient to use because of the T-Shape
Can be used with our Raspberry Pi GPIO cable listed separately
Can also be used with standard IDE cables
يمكن استخدامها مع سلك الراسبري باي
يمكن استخدامها ايضا مع اسلاك IDE القياسية
Specification:
The Raspberry Pi has sold millions of copies worldwide since its first release in early 2012 and is still very popular. Because many Raspberry Pi users do not only have a single-board computer at home, but also 4-5 pieces.
One functions as a HD media player with external hard disk for the home cinema or as an Internet radio with display, the next as a webcam server for camera surveillance with live stream to the mobile phone, then another for home automation such as heating or lighting control and another as a simple WLAN printer server or as a mini-computer for general surfing on the Internet, to name just a few application scenarios.
You will notice that the little “jack-of-all-trades” can not only do a lot, but is also extremely cheap and that is what makes it so attractive. The only thing you should bring along is a flair for programming and not even that, because you can also simply reprogram according to the instructions in forums or books, or you can easily install a finished image on the Raspberry Pi – have the courage to do so!
What’s new with Raspberry Pi 4 B?
Old Raspberry Pi 3 B+ – 1.4 GHz ARM Cortex-A53 Quad-Core CPU
– 1 GB LPDDR2 SDRAM
– Gigabit LAN RJ45 (via USB 2.0 with up to 300 Mbit)
– Bluetooth 4.2
– 4x USB 2.0
– HDMI (1080p @H.264)
– microUSB @ 5V/2.5A
New Raspberry Pi 4 B – 1.5 GHz ARM Cortex-A72 Quad-Core CPU
– 1 GB, 2 GB or 4 GB LPDDR4 SDRAM
– Gigabit LAN RJ45 (with up to 1000 Mbit)
– Bluetooth 5.0
– 2x USB 2.0 / 2x USB 3.0
– 2x microHDMI (1x 4k @60fps or 2x 4k @30fps)
– USB Type-C @ 5V/3A
There are the following 3 different variants
– Raspberry Pi 4 B 2GB with 2 GB memory
– Raspberry Pi 4 B 4GB with 4 GB memory
– Raspberry Pi 4 B 8GB with 8 GB memory
Due to the other connections, like 2x microHDMI instead of 1x HDMI as well as USB Type-C instead of microUSB, but also due to the exchange of LAN port and USB port, new housings are necessary. Otherwise the existing accessories are fully compatible with the new Raspberry Pi.
Specifications:
Raspberry Pi 4 (4GB or 8GB) | 1 | ||
Official RPi 15W (5V/3A) PSU USB C UK Plug | 1 | ||
Case Fan & heatsink for Raspberry Pi 4 case | 1 | ||
Raspberry Pi Micro-HDMI to Standard HDMI, 1m White | 1 | ||
Official Raspberry Pi Case for Raspberry Pi 4 Model B (Red/White) | 1 | ||
Breadboard 8.5×5.5cm (400 Holes) | 1 | ||
potentiometer | 1 | ||
Push Button 4Pin Tactile Switch Buttons 12mm | 5 | ||
alphanumeric LCD (16×2 characters) | 1 | ||
LCD Pins | 1 | ||
RGB LED | 1 | ||
LED 3mm Red | 10 | ||
LED 3mm Green | 10 | ||
LED 3mm Blue | 10 | ||
Male to Female Jumper Wire (40 pcs pack) | 40 | ||
Male to Male Jumper Wire (40 pcs pack) | 40 | ||
Passive Buzzer | 1 | ||
Resistor 0.25W 5% (390R) | 20 | ||
Resistors 1 kOhms | 5 | ||